TASCAM IXR USB AUDIO OCH MIDI INTERFACE 2 IN 2 OUT

Sampling frequencies: 44.1 kHz, 

48 kHz, 88.2 kHz, 96 kHz 

Quantization bit depth: 16 bits, 24 bits

 Mic inputs (balanced):
  XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD)
  Input impedance: 2.2 kO
  Nominal input level (gain knob at MAX): -65 dBu (0.0004 Vrms)
  Nominal input level (gain knob at MIN): -8 dBu (0.3090 Vrms)
  Maximum input level: +8 dBu (1.9467 Vrms)
  Gain range: 57 dB
  Instrument inputs (MIC/LINE INST switch set to INST): 6.3-mm standard TS jack (Tip: HOT, Sleeve: GND)
  Input impedance: 1 MO or more
  Nominal input level (gain knob at MAX): -63 dBV (0.0007 Vrms)
  Nominal input level (gain knob at MIN): -6 dBV (0.5015 Vrms)
  Maximum input level: +10 dBV (3.162 Vrms)
 Gain range: 57 dB
  Line inputs (balanced, MIC/LINE INST switch set to MIC/LINE): 6.3-mm standard TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND)
  Input impedance: 10 kO
  Nominal input level (gain knob at MAX): -53 dBu (0.0017 Vrms)
  Nominal input level (gain knob at MIN): +4 dBu (1.228 Vrms)
  Maximum input level: +20 dBu (7.75 Vrms)
  Gain range: 57 dB Line outputs (balanced): 6.3-mm standard TRS jack (Tip: HOT, Ring: COLD, Sleeve: GND)
  Output impedance: 110 O Nominal output level: +4 dBu (1.273 Vrms)
  Maximum output level: +20 dBu (7.75 Vrms)
  Headphones output: 3.5-mm stereo mini jack
  Maximum output power: 18 mW + 18 mW or higher (THD+N 1% or less, into 32 O load)
  MIDI input: 5-pin DIN Format: standard MIDI
  MIDI output: 5-pin DIN Format: standard MIDI USB port (PC/MAC/POWER): 4-pin USB B-type
  Transfer rate: USB 2.0 High Speed (480 Mbps) USB port for IOS device: USB A-type
  Transfer rate: USB 2.0 High Speed (480 Mbps)
  Mic preamp EIN (equivalent input noise): -125 dBu or less (150 O termination, gain knob at maximum)
  Frequency response (input to line output or headphones output)
   - At 44.1/48 kHz 20 Hz: +0 dB/-0.3 dB (JEITA) 20 kHz: +0 dB/-0.1 dB (JEITA) 20 kHz: +0 dB/-0.5 dB (headphones out, JEITA)
   - At 88.2/96 kHz 20 Hz: +0 dB/-0.3 dB (JEITA) 40 kHz: +0 dB/-0.2 dB (JEITA) 40 kHz: +0 dB/-2.0 dB (headphones out, JEITA)
  S/N ratio: 101 dB or higher (mic/line in to line out, gain knob at minimum, JEITA)
  Distortion: 0.003% or less (mic/line in to line out, 1 kHz sine wave, nominal input level, maximum output level, JEITA)
  Crosstalk: 95 dB or more (mic/line in to line out, 1 kHz, JEITA)

Check the TEAC Global Site (http://teac-global.com/) for the latest information about supported operating systems.
 iOS devices: Apple iOS devices with a Lightning connector and running iOS 8 or later
Windows Supported operating systems: Windows 10 32-bit, Windows 10 64-bit,
Windows 8.1 32-bit, Windows 8.1 64-bit,
Windows 7 32-bit SP1 or later, Windows 7 64-bit SP1 or later (Windows Vista and Windows XP are not supported)
Computer hardware requirements:
Windows-compatible computer with a USB 2.0 port
 CPU/processor speed: 2 GHz or faster dual core processor (x86)
Memory: 2 GB or more
 Operation of this unit was confirmed using standard computers that meet the above requirements. This does not guarantee operation with all computers that meet the above requirements. Even computers that meet the same system requirements might have processing capabilities that differ according to their settings and other operating condition. Mac OS Supported operating systems: OS X El Capitan (10.11 or later), OS X Yosemite (10.10 or later), OS X Mavericks (10.9.1 or later), OS X Mountain Lion (10.8.4 or later) Computer hardware requirements:

Mac with a USB 2.0 port
 CPU/processor speed: 2 GHz or faster
dual core processor Memory: 2 GB or more

Supported audio/MIDI drivers iOS: Core Audio for iPhone
Windows: ASIO 2.0,
WDM, MIDI Mac: Core Audio, Core MIDI Power sources: USB bus power (when using a computer),
USB power adapter (when using an iOS device) Power consumption: 2.5 W

External dimensions (W x H x D,
excluding protrusions): 210 x 35 x 141 mm
Weight: 660 g
Permissible operating temperature range: 5–35 °C
Bundled DAW software (download editions): Steinberg Cubasis LE, Steinberg Cubase LETascam iXR

USB-ljud och MIDI-gränssnitt 2 in / 2 ut iXR är ett bärbart MIDI-gränssnitt som ansluter direkt till en iPad med blixtkabeln som vanligtvis levereras med en iOS-enhet. Den kompakta konstruktionen har inga skarpa kanter och kroppen består av slitstarkt, rullat aluminium. Det erbjuder också Ultra-HDDA-mikrofonpermer och ett signal-brusförhållande på 101 dB och ett ekvivalent ingångsljud på -125 dBu, vilket resulterar i en oerhört låg ljudnivå. Det tillåter att spela in flera instrument som akustisk gitarr och vindinstrument, samt sång i högupplösta format